Valor Instructions

Level 1 Retention Mechanism
Drawing & Holstering Instructions

Holstering:

⚠️ Ensure you have a secure grip on the firearm and make sure the trigger and trigger guard are clear of any objects like fingers, clothing, or any other obstructions.

1. Place the firearm straight down into the holster. The Level 1 Retention Mechanism will automatically lock the firearm into place and an audible “click” will be heard when the retention is properly engaged. (figure 1)

Drawing:

⚠️ Establish a secure grip on the firearm. Ensure your finger does not contact the trigger until you are ready to fire.

1. Apply pressure to the Release Button with your thumb in a sliding motion rearwards. (figure 1)
2. Once the Release Button is unable to be moved further and the Level 1 Retention Mechanism is disengaged, draw the firearm straight out of the holster. (figure 2)

Level 2 Retention Mechanism
Drawing & Holstering Instructions

Holstering:

⚠️ Ensure you have a secure grip on the firearm and make sure the trigger and trigger guard are clear of any objects like fingers, clothing, or any other obstructions.

1. Place the firearm straight down into the holster. The Level 1 Retention Mechanism will automatically lock the firearm into place and an audible “click” will be heard when the retention is properly engaged. (figure 1)
2. Pull the Retention Hood backwards, over the firearm until an audible “click” is heard, the Release Button extends upwards fully, and the Retention Hood stays securely in place. (figure 2)
3. If equipped, close the Optic Shroud securely, making sure it latches onto the catch point of the Retention Hood. The Retention Hood and Optic Shroud can be closed simultaneously.

Drawing:

⚠️ Establish a secure grip on the firearm. Ensure your finger does not contact the trigger until you are ready to fire and the Retention Hood and Optic Shroud (if equipped) are clear of obstructions.

1. Apply pressure downwards on the Release Button with your thumb so that the Retention Hood (and Optic Shroud, if attached) opens completely. (figure 1)
2. Apply pressure to the Release Button with your thumb in a sliding motion rearwards. (figure 2)
3. Once the Release Button is unable to be moved further and the Level 1 Retention Mechanism is disengaged, draw the firearm straight out of the holster. (figure 3)

Level 3 Retention Mechanism
Drawing & Holstering Instructions

Holstering:

⚠️ Ensure you have a secure grip on the firearm and make sure the trigger and trigger guard are clear of any objects like fingers, clothing, or any other obstructions.

1. Place the firearm straight down into the holster. The Level 1 Retention Mechanism will automatically lock the firearm into place and an audible “click” will be heard when the retention is properly engaged. (figure 1)
2. Pull the Retention Hood backwards, over the firearm until an audible “click” is heard, the Release Button extends upwards fully, and the Retention Hood stays securely in place. (figure 2)
3. If equipped, close the Optic Shroud securely, making sure it latches onto the catch point of the Retention Hood. The Retention Hood and Optic Shroud can be closed simultaneously.
4. Move the Button Cover backward until it completely covers the Release Button and clicks into place. (figure 3)

Drawing:

⚠️ Establish a secure grip on the firearm. Ensure your finger does not contact the trigger until you are ready to fire and the Retention Hood and Optic Shroud (if equipped) are clear of obstructions.

1. Place your thumb on the Button Cover and apply pressure forward. (figure 1)
2. Apply pressure downwards on the Release Button with your thumb so that the Retention Hood (and Optic Shroud, if attached) opens completely. (figure 2)
3. Apply pressure to the Release Button with your thumb in a sliding motion rearwards. (figure 3)
4. Once the Release Button is unable to be moved further and the Level 1 Retention Mechanism is disengaged, draw the firearm straight out of the holster. (figure 4)

Optic Shroud (Level 2 & 3 Only)
Installation & Removal Instructions

Installation:

1. On the front face of the holster insert the nubs on the bottom of the Optic Shroud into the corresponding cutouts on the holster.
2. The bottom nub on each side goes into the circular hole, and the top nub goes into the slot. (figure 1) You may have to slightly pry the sides of the Optic Shroud outwards in order to successfully install the Optic Shroud.
3. The Optic Shroud will not close if the Retention Hood is not also in the closed position. Optic Shroud should latch onto the Retention Hood when closed. Ensure proper function of the Optic Shroud by opening and closing the Retention Hood and Optic Shroud.

Removal:

1. With the Optic Shroud and Retention Hood in the “open” position, insert a small phillips head screwdriver into the small opening created at the base of the Optic Shroud.
2. Gently apply prying pressure until the nubs on the Optic Shroud are popped out of the slot and hole.
3. Gently remove the Optic Shroud from the holster.

Level 2–Level 3 Conversion
Release Button Cover Plate Instructions

Removal:

1. If equipped, remove the Optic Shroud. (See Optic Shroud Section Above)
2. Remove the two screws on the Release Button Cover Plate. (figure 1)
   
3. The Release Button Cover Plate can be removed by first tilting the plate downwards then lifting upwards and away from the holster body. (figure 2)
   ⚠️ Be careful not to snap the indexing hook located at the bottom of the plate.

Installation:

1. Follow all removal steps.
2. Remove the currently installed insert on the back of the Release Button Cover Plate.
3. Align the new insert (sold separately) of your choice on the back of the Release Button Cover Plate. (figure 1)
4. Replace the Release Button Cover Plate by first inserting the indexing hook into the indexing hole. (figure 2)
5. Make sure the 3/16" posts in place on the inside of the holster body and re-install both Release Button Cover Plate screws using high-strength threadlocker. (figure 3)

Endcap Replacement
Removal & Installation Instructions

Removal:

1. Unscrew the 4 screws located on the bottom of the holster. (figure 1)
2. Remove the Endcap by gently pulling the top of the Endcap towards you. The bottom of the Endcap features a friction-fit indexing hook and must be pulled away after the top. (figure 2)

Installation:

1. Attach the new Endcap (Sold Separately) by hinging the bottom over the indexing hook and pressing the rest of the Endcap in place. Ensure the tab at the bottom of the Front Plate is covered by the Endcap and the indexing hook is engaged. (figure 1)
2. Use the Endcap screws with high-strength threadlocker to reattach the Endcap. (figure 2)

Front Plate Replacement
Removal & Installation Instructions

Removal:

1. Follow all Endcap removal steps.
2. Unscrew the single screw located on the Front Plate. (figure 1)
3. Remove the Front Plate by gently pulling downward and out of the inset location at the top of the holster. (figure 2)

Installation:

1. Attach the new Front Plate (Sold Separately) by first sliding the top of the plate up into the inset location at the top of the holster. (figure 1)
2. Using a 5/8 Truss Head Screw (for Tek-Mount Mini Receiver on Front Mounting Plate) or a 3/8 Flat Head Screw (for Standard Front Plate), secure the new front plate to the holster using high-strength threadlocker. (figure 2)
3. Follow all Endcap installation steps.

Attachment Instructions
Mounting Holster to Attachment

Each VALOR Duty Holster is designed with a modular mounting hole pattern designed to accommodate most common belt-mounted attachments. These instructions are specifically for the Blade-Tech 360 Insert Disk, Valor Duty Loop, and Valor Duty Drop using the included hardware. Any third-party attachment may require different mounting hardware (not supplied). Use screws and posts in at least three (3) designated mounting holes with high-strength threadlocker.

Mounting Holes:

The diagram in this section dictates what length of screws need to be used in each mounting hole. Ensure that posts are secure and slotted into their respective inset locations on the inside of the holster body.

Please Note: These locations and screw lengths are only applicable to direct mounting attachments. If using 1/4 Inch Offset Spacer or Axon Signal Sidearm Adapter Kit follow their respective installation instructions.

¼ Inch Offset Spacer + Attachment Instructions
Only refer to when using ¼ Inch Offset Spacer (Sold Separately)

Each VALOR Duty Holster is designed with a modular mounting hole pattern designed to accommodate most common belt-mounted attachments. These instructions are specifically for the Blade-Tech 360 Insert Disk, Valor Duty Loop, and Valor Duty Drop with the ¼ inch offset spacer using the included hardware. Any third-party attachment may require different mounting hardware (not supplied). Use screws and posts in at least three (3) designated mounting holes with high-strength threadlocker.

Mounting Holes:

The diagram in this section dictates what length of screws need to be used in each mounting hole. Ensure that posts are secure and slotted into their respective inset locations on the inside of the holster body.

Please Note: These locations and screw lengths are only applicable if using the ¼ Inch Offset Spacer with the Blade-Tech 360 Insert Disk, Valor Duty Loop, and Valor Duty Drop.

• 360 Insert Disk Screw Sizes:
  Hole A – 3/4" Screw
  Hole B – 5/8" Screw
• Duty Drop & Duty Loop Screw Sizes:
  Hole A – 3/4" Screw
  Hole B – 5/8" Screw

⚠️ IMPORTANT – Use of a high-strength threadlocker on any screw is required for full operational security. During assembly, Blade-Tech pre-applies high-strength threadlocker to all screws. If any screws are removed or loosened, threadlocker must be re-applied by the user.

⚠️ IMPORTANT – Use screws and posts in at least three (3) different mounting holes to secure the attachment to the operator side of the holster. Ensure that posts are on the inside of the holster, and they are properly seated in the inset channels.

⚠️ IMPORTANT – Before modifying, adjusting, or disassembling the Valor Duty holster in any way, remove your firearm from the holster and store it UNLOADED in a secure location. Blade-Tech is not liable for any property damages, personal damages, injuries, or deaths due to a holster that has been modified or adjusted by the user in any way.

⚠️ IMPORTANT – By changing, installing, removing, or adjusting any attachment on the Valor Duty Holster, you, the user, claim full and complete responsibility for any intentional or unintentional incidents regarding the holster attachment.

⚠️ IMPORTANT – Before inserting a firearm into the holster, ensure that the ends of the screws are not protruding into the inner holster body. If screws protrude, damage and scratches may occur to the firearm.

⚠️ IMPORTANT – Ensure screws are tightened to 15 in-lb of torque to secure attachment to holster. Do not overtighten.

Signal Sidearm Installation Instructions
Axon Signal Sidearm System

1. If installed, begin by removing the existing mounting attachment that is affixed to the Holster.
2. Using the included Torx Key, unscrew the Signal Sidearm Cover Plate and lift the plate off of the holster. (figure 1)
3. Place the Signal Sidearm Unit where the Cover was, making sure it fully seats into the inset location. (figure 2)
4. Using the Signal Sidearm Attachment Screws (longer) and included T6 Torx Key, secure the Signal Sidearm Unit to the holster. (figure 3)
5. Place the Signal Sidearm Adapter over the mounting holes on the holster. (figure 4)
6. Place the Mounting Attachment over the Signal Sidearm Adapter ensuring all mounting holes line up.
7. Using screw lengths designated in the section below, affix the attachment and Signal Sidearm Adapter to the Holster.

Signal Sidearm Adapter Kit Attachment Instructions
Mounting Holster to Attachment & Signal Sidearm Adapter Kit

Each VALOR Duty Holster is designed with a modular mounting pattern designed to accommodate most common belt-mounted attachments. These instructions are specifically for the Blade-Tech 360 Insert Disk, Valor Duty Loop, and Valor Duty Drop with the Signal Sidearm Adapter Kit using the included hardware. Any third-party attachment may require different mounting hardware (not supplied). Use screws and posts in at least three (3) designated mounting holes with high-strength threadlocker.

Mounting Holes:

The diagram in this section dictates what length of screws need to be used in each mounting hole. Ensure that posts are secure and slotted into their respective inset locations on the inside of the holster body.

Please Note: These locations and screw lengths are only applicable if using the Signal Sidearm Adapter Kit with the Blade-Tech 360 Insert Disk, Valor Duty Loop, and Valor Duty Drop.